You are missing some Flash content that should appear here! Perhaps your browser cannot display it, or maybe it did not initialize correctly.
HOME WITHOUT HARM, EVERYONE, EVERYDAY
Pigtail Eyebolt - Suspension Bolt
Pigtail eyebolts are threaded at one end for the attachment of an expansion unit. The other end is hot worked to form a pigtail eyebolt.
APPLICATIONS
They are recommended for the suspension of air, water, refrigeration and ventilation columns, as well as for electrical and telephone cables and chain type handrails.
They are not recommended for heavier duty usage such as snatch block rigging or the support of platforms.
LENGTHS
Pigtail eyebolts are available in standard lengths as shown in the table below. Lengths are measured to below the twist.
| Type | Length | I.D. of eye | Breaking load (kN) Min |
|---|---|---|---|
| M16 | 250 | 64 | 78.5 |
| 380 | 64 | 78.5 | |
| 450 | 64 | 78.5 | |
| 530 | 64 | 78.5 | |
| M20 | 450 | 64 | 105 |
| 530 | 64 | 105 |
Non standard lengths available on request
THREADS
A cold-rolling process forms all threads.
The pigtail eye is hot formed for better mechanical properties.
The following standard thread types are available: Metric (right hand only) - M16 x 2 - 8g and M20 x 2.5 - 8g.
MECHANICAL PROPERTIES OF RAW MATERIAL
| Type | Yield strength (MPa) | Ultimate Tensile strength (MPa) | Elongation (%) |
|---|---|---|---|
| M16 | 360 (min.) | 570 (min.) | 22 |
| M20 | 450 (min.) | 600 (min.) | 14 |
Download Pigtail Eyebolt Brochure (641 KB)